- Competition Chevrolet Ltd.
- 40 Boulder Blvd
- Stony Plain AB
- T7Z 1V7 Canada
- Toll-Free: 1-855-505-3103
- www.competitionchevrolet.com
2012 Chevrolet Silverado 2500HD Crew Cab LTZ Z71 'Plus' 4x4- Duramax Diesel
$68,055.00
Toll-Free: 1-855-505-3103
40 Boulder Blvd, Stony Plain, AB
150-Plus Point Inspection
GM Programs > Optimum Used > 150+ Point Inspection
The Rigorous 150+ Point Inspection
From the proper operation of the engine and brakes to the condition of the sun shade and map lights, you can be sure that each Optimum Vehicle has been meticulously inspected by licensed mechanics before it's offered for sale. During the inspection process, each vehicle must pass a check of a minimum of 150 different points. This ensures the vehicle is in excellent condition - inside and out. On some vehicles, up to 180 different points are inspected. Plus, regular maintenance is performed and faulty components are repaired or replaced.
A GM trained technician performs the following 150-plus point inspection on every Optimum Used Vehicle:
Engine
Instrumentation and Interior Components Inspection
Pre-Test Drive Inspection
Test Drive
Service Bay
Appearance
Final
Each Optimum Certified Used Vehicle has been meticulously inspected by licensed mechanics before it reaches the sales floor. During the inspection process, each vehicle must pass a minimum of 150 points, ensuring that the vehicle is in excellent condition inside and out. Plus, regular maintenance is performed and faulty components are repaired or replaced.
A GM trained technician performs the following 150+ point inspection on every Optimum Certified Used Vehicle.
Engine
1. Check the vehicle mileage against service records for accuracy
ENGINE COMPARTMENT
2. Hood release, hinges, prop rod or gas struts provide proper operation
3. Check finish (rust, corrosion)
4. Check factory instruction stickers
ENGINE CONDITION
5. Verify original equipment and displacement
6. Valve covers and head gaskets in good condition
7. Condition of engine belts, automatic belt tensioner, hoses, and wires
8. Condition of hose clamps, retainer clips, and wire casings
9. Look for areas of concentrated dirt or grime
ENGINE OIL LEVEL/CONDITION
10. Check engine oil level, verify oil clarity and viscosity
ENGINE COOLANT LEVEL/CONDITION
11. Check radiator for leaks and damage/fan shroud is securely in place
12. Verify that blades of cooling fans are not broken or bent
13. Check coolant level, freeze protection rating
AIR FILTER INSPECTION
14. Inspect air filter/filter housing for debris (leaves, bugs)
BATTERY LOAD TEST
15. Inspect battery for cracks. Clean and inspect battery top, posts & cables
16. Measure battery voltage/conduct load test
IGNITION SYSTEM
17. Inspect system for loose, cracked or burned wires.
18. Check wire for short circuits and arcing
POWER STEERING FLUID LEVEL
19. Inspect power steering fluid level
BRAKE FLUID LEVEL
20. Locate and inspect master cylinder reservoir, check brake fluid level
AUTOMATIC TRANSMISSION FLUID LEVEL & CONDITION
21. Check all ranges from “Park” to “1st” for proper engagement
22. Fluid level meets manufacturer's specified level, clarity and viscosity
FUEL SYSTEM
23. Inspect fuel injection system for proper operation
24. Check fuel system for leaks or loose wires and lines
25. Inspect evaporative emissions for proper operation
MANUAL TRANSMISSION FLUID LEVEL
26. Measure fluid level, clarity and viscosity (if equipped)
MANUAL TRANSMISSION HYDRAULIC CLUTCH FLUID LEVEL
27. Check clutch fluid reservoir for proper level
WASHER FLUID LEVEL
28. Inspect/fill washer fluid reservoir (front)/(rear, if equipped)
STARTER PERFORMANCE (AUTOMATIC TRANSMISSION)
29. Check that starter only operates in “Park” or “Neutral”
STARTER PERFORMANCE (MANUAL TRANSMISSION)
30. Starts only when clutch pedal pressed all the way down (GM Vehicles)
ENGINE RUNNING, NOISE, VIBRATION & HARSHNESS
31. Check for fluid leaks or valvetrain noise
32. Vacuum system condition
33. Fuel delivery system
34. Valve cover/cylinder head/exhaust manifold gaskets soundness
35. Radiator/heater hoses condition
36. Power steering pump/hose condition
37. No squeaking belts
Instrumentation and Interior Components Inspection
38. SRS system warning light/self test
39. ABS system warning light/self test
INSTRUMENT PANEL
40. Instrument panel/gauge lights and operation
41. Electronic instrument cluster, Head-up Display operational (if equipped)
CLIMATE CONTROL
42. HVAC/Front and Rear Electronic Climate Control (if equipped)
43. All climate control directional functions/vents working properly
AUDIO/VIDEO SYSTEM
44. Audio controls, speakers, steering wheel controls (if equipped)
45. Power antenna (if equipped)
46. DVD player operational (if equipped)
47. Navigation system operational (if equipped)
WINDSHIELD WIPER/WASHER OPERATION
48. Front wiper/washer controls are operational
49. Front wiper blades
50. Rear wiper/washer controls are operational (if equipped)
51. Rear wiper blade (if equipped)
ELECTRIC REAR WINDOW DEFROSTER OPERATION
52. Defroster switch/heating grid operation
HORN OPERATION
53. Horn operation/sound quality
LIGHTER/POWERPOINT OUTLETS
54. Cigarette lighter operational, aux. powerpoints operational
TILT STEERING WHEEL (IF EQUIPPED)
55. Steering wheel locks in each tilt position
INSIDE REARVIEW MIRROR
56. Rearview mirror adj., range of movement, Auto dim (if equipped)
57. Map/Reading lights (if equipped)
WINDOWS
58. Power windows and controls are operational (if equipped)
59. Sliding rear window/vent windows (if equipped)
OUTSIDE MIRROR CONTROLS
60. Check mirrors for full movement in all directions
61. Check that mirrors have good clarity and no scratches or cracks
62. Heated Mirrors/Personal Memory systems function (if equipped)
POWER SUNROOF OPERATION (IF EQUIPPED)
63. Sunroof opens, tilts and closes properly
64. Check sunroof track for any obstructions or damage
65. Check sunroof seals for any cracks or damage
REMOVABLE ROOF PANELS (IF EQUIPPED)
66. Roof panel latches
67. Check roof panel weather stripping for cracks or damage
CONVERTIBLE TOP OPERATION (IF EQUIPPED)
68. Headliner condition (if equipped)
69. Check roof structure for bent rods or damage
70. Top opens and closes fully
71. Rear window, glass or plastic condition
72. Convertible top seals and clamps
SEAT FABRIC AND TRIM CONDITION
73. Vehicle seats are free from wear, stains, or tears
74. Passenger compartment trim panels fit and finish
75. Headliner fit and condition
SEAT ADJUSTMENT
76. Driver and Passenger seat tracks are operational
77. Adjustable head restraints (if equipped)
78. Folding rear seatback/Valet Lockout feature (if equipped)
79. Driver/passenger/rear seat controls are operational
SAFETY BELT CONDITION/INTEGRAL CHILD SEAT OPERATION
80. All seat belts are operational
81. Inspect safety belt webbing and buckles at all seating positions
82. Height adjustable shoulder belts work correctly (if equipped)
83. Check that integral child seat is operating properly (if equipped)
84. Inspect all child seat hardware and latches
SUN VISOR OPERATION AND CONDITION
85. Sun visors are operational
INTERIOR/COURTESY LIGHT OPERATION
86. Check that all interior lights/switches are operational
REMOTE DECKLID/LIFTGATE RELEASE OPERATION
87. Check operation of decklid/liftgate during remote release
88. Inspect weather seal for damage
89. Decklid pull down feature (if equipped)
REMOTE FUEL FILLER DOOR RELEASE OPERATION (IF EQUIPPED)
90. Inspect operation of the remote fuel filler door release feature
91. Interior fuel door switch, release mechanism working properly
ASHTRAY
92. Inspect ashtray for broken, bent, or melted components
GLOVE BOX OPERATION
93. Inspect latch, lock, and hinges for proper operation
DOOR TRIM AND LOCK OPERATION
94. Check that all doors open and close smoothly
95. Inspect operation manual or power door locks, rear door security lock
96. Check that doors cannot be opened in the “Locked” position
97. Check hand held remote transmitter operational (if equipped)
98. Check all interior/exterior door handles for damage
99. Inspect fit and finish of each door trim panel, armrest, assist strap
CARPET AND FLOOR MAT CONDITION
100. Inspect carpet and floor mats for burns, dirt, excessive wear
CARGO AREA
101. Inspect cargo area trim panels for fit and finish
102. Cargo area, door lock switch operation, powerpoint power (if equipped)
SPARE TIRE CONDITION/JACK & WRENCH LOCATION
103. Inspect spare tire and wheel condition
104. Inspect that all tools needed for spare tire change are intact
-
Pre Test-Drive Inspection
HEAD LAMP/FOG LAMP OPERATIONS
105. Headlamp switch, High/Low beam is functional
106. Headlamps are aimed properly
107. Twilight/headlamp delay feature OK (if equipped)
108. Fog lamps are aimed and functional (if equipped)
PARKING/BRAKE/BACK UP/TURN & SIDE MARKER LAMPS
109. Front and rear parking lamps
110. Brake and backup lamps
111. Left/Right turn signal lamps
HAZARD WARNING LIGHTS
112. Hazard warning lights work with vehicle running/not running
WHEEL AND TIRE CONDITION (INSPECT PRE TEST DRIVE AND IN SERVICE BAY)
113. Tires meet 4/32" minimum requirement
114. Wheel covers/wheel centre hubs OK (if equipped)
115. Tire side walls, valve stems, and wear pattern
116. Tire size/correct air pressure/lug nuts secured
117. Inspect wheel rims for damage
SHOCK ABSORBER TEST
118. Front shock absorbers/strut assembly
119. Rear shock absorbers/strut assembly
-
The Test Drive
BRAKE SHIFT/TRANSMISSION INTERLOCK (AUTOMATIC TRANSMISSION)
120. Gear selector cannot be moved out of Park unless brake is applied
TRANSMISSION OPERATION (AUTOMATIC)
121. Transmission gear engagement/shift points are smooth
TRANSMISSION OPERATION (MANUAL)
122. Clutch pedal/gear shift engagement
123. No transmission noise
ENGINE PERFORMANCE
124. Engine driveability/performance
BRAKE OPERATION
125. Power assisted braking system is functional
126. Rear parking assistance monitor operational (if equipped)
127. Anti-lock brake system warning/self-test light is functional
128. Anti-lock brake system functional (if equipped)
129. Vehicle tracks straight under hard braking conditions
SUSPENSION/DRIVETRAIN/NOISE/VIBRATION/HARSHNESS
130. No abnormal vehicle noise, vibrations or harshness identified
CORNERING ABILITY
131. Vehicle cornering dynamics
132. Vehicle has no abnormal body roll
CRUISE CONTROL (IF EQUIPPED)
133. Cruise control holds a set speed/adjustments work properly
Service Bay Inspection
TRANSMISSION CASE INSPECTION
134. Transmission case/pan structurally sound
MANUAL TRANSMISSION FLUID LEVEL AND CONDITION
135. Fluid level, clarity and condition
TRANSFER CASE (4-WHEEL DRIVE MODELS)
136. Fluid level, clarity and condition
137. Transfer case/skid plate structural condition
BRAKE SYSTEM CONDITION
138. Brake rotor/drum surfaces
139. Brake pads/shoes have 40% or more remaining pad life
140. Brake shoes have 40% or more remaining life
141. Parking brake operation
ENGINE MOUNTS/FRONT SUSPENSION LINKS & BUSHINGS
142. Inspect all engine mounts, grommets and bushings
143. Front suspension links/sway bar/mounts
STRUTS AND SHOCK ABSORBER CONDITION
144. Shock absorbers/struts free of leaks and damage
STEERING SYSTEM CONDITION
145. Inspect structural condition of all steering system elements
CV JOINT DUST BOOT CONDITION
146. CV dust cover boot void of rips/damage
DRIVE AXLE, AXLE FLUID LEVELS
147. Drive axle meets Manufacturer specifications
148. Inspect differential case for fluid leaks
149. Front/Drive axle fluid level
FUEL TANK SYSTEM CONDITION
150. Fuel tank and delivery lines are sound, no fuel odour
VEHICLE/STRUCTURAL DAMAGE
151. Vehicle shows no signs of collision damage
EXHAUST SYSTEM
152. Exhaust system hung/routed properly, meets structural integrity, exhaust tone
ENGINE OIL AND FILTER CHANGE, CHASSIS LUBE
153. Lubricate all chassis points, perform engine oil and filter change
Appearance
EXTERIOR WEAR AND TEAR INSPECTION WINDOW GLASS
154. Inspect all glass surfaces for chips and cracks
HOOD CONDITION
155. Inspect hood for proper alignment with fenders, grille, and fascia
156. Inspect hood's finish for dents and scratches
GRILLE, FRONT BUMPER, AND FASCIA CONDITION
157. Check that bumper guards and rubstrips are securely fastened
158. Check grille, front bumper, or fascia alignment/condition
159. Vehicle is free from road tar and tree sap
DRIVER SIDE FENDER, DOOR(S), QUARTER PANEL CONDITION
160. Inspect for panel alignment, finish quality, previous body work
161. Weather seals, placement/condition
162. Bodyside mirrors, mouldings and badging properly secured
DECKLID, LIFTGATE, TAILGATE OR REAR CARGO DOOR CONDITION
163. Inspect the rear body panel surfaces for dings, dents and scratches
164. Decklid, liftgate or rear panel doors
165. Weather seals, placement/condition
166. Pickup tailgate/bed/side rails (if equipped)
167. Bedliner OK
REAR BUMPER/FASCIA CONDITION
168. Inspect all rear trim components for proper fit, no collision damage
169. Check that all bumper guards and rubstrips are securely fastened
PASSENGER SIDE FENDER, DOOR(S), QUARTER PANEL CONDITION
170. Inspect areas for panel alignment, finish quality, or previous body work
171. Weather seals, placement/condition
172. Bodyside mirrors, mouldings and badging properly secured
RADIO ANTENNA
173. Inspect mast antenna, antenna secured
-
Final Inspections
174. Engine compartment is clean/degreased
175. Interior compartment has been cleaned/detailed
176. Vehicle exterior has been washed/waxed/detailed
